HYDR. SHEET BENDING ROLLS HESSE H3R UHS
Three rolls – symmetrical rolls arrangement

On the hydraulic sheet bending rolls HESSE H3R HSS, with 3 symmetrically arranged rolls, the upper roll is fully hydraulic driven. The sheet metal clamping takes place via feed of the upper roll. Pre-bending and bending feed functions are realized by the independently hydraulically horizontal linear adjustable lateral rolls whereby also double sided pre-bending works are possible.

The special construction of this machine offers some advantages:

• high versatility on heavy plate bending
• reduced overall dimensions thus no under floor design as well as easier transportation for
medium and big machines
• lower working height which requires less foundation specifications
• best pre-bending performance (extreme short straight rest piece) by reducing centre-distance
between lateral rolls subject to the used material thickness and bending radius
• exact adjustment of upper roll allowing perfect re-rolling and calibration operations
• easy material removal
• large working strokes


mod. H4R HSS 30/350 3.100 x 20,0 mm

standard equipment

• fully hydraulic drive of upper roll
• hydr. horizontal linear feed of lateral rolls
• digital read-out of upper and lateral rolls
position
• conical bending device
• hydraulic releave of upper roll
• hydraulic drop-end bearing
• hardened rolls
• 2 working speeds
• central lubrication
• overload safety device
• moveable control panel
• machine and equipment according to
the CE regulations

optional equipment

• ground and polished rolls
• hydraulically/motorized adjustable upper and
lateral supports

adjusting cylinder for lateral roll

mod. H4R HSS 30/350 3.100 x 20,0 mm with opened hydr. drop-end bearing

attention: Acrobat Reader required

HESSE+CO Maschinenfabrik GmbH
 IZ NOE-Sued - Straße 4 Objekt 8 - Austria-2351 Wiener Neudorf
Tel. +43/2236/638 70-0 - Fax +43/2236/636 62
office@hesse-maschinen.com