MOT. / MAN. SHEET BENDING ROLLS HESSE HIR / HR
Three rolls – asymmetrical rolls arrangement

The motorized sheet bending rolls HESSE HIR are equipped with 3 asymmetrically arranged rolls 2 of them are motor driven. At manual sheet bending machines HESSE HR they are driven by hand. The sheet metal clamping takes place via manual feed of the lower roll. Pre-bending and bending feed functions are realized also by manual adjustment of bending roll.


mod. HIR 1270x68 1.270 x 1,2 mm

standard equipment

• motorized drive of upper and lower roll with
brake motor (only mod. HIR)
• manual drive of upper and lower roll with
handwheel (only mod. HR)
• man. feed of lower and bending roll
• conical bending device
• releave of upper roll
• upper roll can swing-out forward
• moveable double foot pedal (only mod. HIR)
• machine and equipment according to
the CE regulations

optional equipment

• hardened rolls


mod. HIR 1270x68 1.270 x 1,2 mm with swung-out upper roll

mod. HR 1270x75 1.270 x 1,5 mm

mod. HR 1270x75 1.270 x 1,5 mm with swung-out upper roll

attention: Acrobat Reader required

HESSE+CO Maschinenfabrik GmbH
 IZ NOE-Sued - Straße 4 Objekt 8 - Austria-2351 Wiener Neudorf
Tel. +43/2236/638 70-0 - Fax +43/2236/636 62
office@hesse-maschinen.com