HYDRAULIC CNC PRESS BRAKE HESSE CNC standard

mod. CNC standard 30160

The CNC press brakes HESSE are available in up to eleven axes configurations.
The CNC standard with CNC Cybelec DNC 60, 1-axis back gauge and also standard tools system Amada-Promecam is the low cost full CNC controlled machine.

At all models the synchronisation of Y1 and Y2 is controlled by proportional valves.

Flexibility, quality, productivity and safety…united in the HESSE CNC press brakes.
Computer Numerical Control

Cybelec DNC 60 		Cybelec DNC 60

• numerical display (no graphic)
• graphical view possible with Link 7000 software (option)
• ergonomic design
• software key switch for operating level selection
• direct bending angle input
• automatic calculation of the blank sheet size
• programming of upper beam at an angle
• programmable tool dimensions for easy recall when
programming a product
• bending angle correction
• programming of bending and retraction speed
• manual, semi automatic and full automatic working mode
• tonnage calculation/programming by CNC
back gauge

1-axis back gauge X
X-axis movement on linear guides and ball screws as well as automatic retraction.
anti deflection

manual, central with hand wheel adjustable anti deflection system in table (option)

motorized anti deflection system controlled by CNC (option)
To get a constant bending angle over the whole length also on longer work pieces a anti deflection system is used.
tools

standard Promecam-Amada uper system tool

standard Promecam-Amada 4-V die
Various standard AMADA-PROMECAM precision tools are available - sharp, straight, cranked, stamping tools etc.
Individual upper and lower tools are also fast available - please ask for our seperate tools catalogue.
safety
All HESSE CNC press brakes comply with the actual safety and CE-regulations and are equipped (among other things) with laser safety device on the machine front.
standard equipment
• numerical control CYBELEC DNC 60
• Y1, Y2, X (3 axes)
• tool system Amada-Promecam
• 80 mm/sec. back gauge speed
• up to 150 mm/sec. ram speed
• upper tool 75°, standard cranked, radius hardened,
ground and sectioned
• 4-V die 16/ 22/ 35/ 50 mm, hardened and
ground
• motorized back gauge on linear guides and ball
screws
• sheet support arms with T-slots and tilt stops
• manual height-adjustable finger blocks
• laser safety device
• in conformity with CE-regulations
optional equipment
• CNC controlled R-axis
• manual, central with hand wheel adjustable anti deflection system in table
• motorized anti deflection system controlled by CNC
• HESSE hydr. upper tool clamping for WILA tools (without tool)
• HESSE hydr. lower tool clamping for WILA tools (without tool) with motorized anti deflection system
controlled by CNC
• hyd. upper tool clamping WILA NSCL-II (without tool)
• hyd. lower tool clamping WILA NSCR-II (without tool) with motorized anti deflection system
controlled by CNC
• mech. upper tool clamping WILA NSCL Basic (without tool)
• mech. lower tool clamping WILA NSCR Basic (without tool) with motorized anti deflection system
controlled by CNC
• hydr. upper tool clamping system Amada-Promecam
• spezial throat depth
• other safety devices
• additional finger blocks
• additional support arms
• quick tool clamping
• sliding arms
• laser hardened HESSE tools
• back gauge area 1.000 mm
• T-slots in table
• oil cooler

attention: Acrobat Reader required

HESSE+CO Maschinenfabrik GmbH
 IZ NOE-Sued - Straße 4 Objekt 8 - Austria-2351 Wiener Neudorf
Tel. +43/2236/638 70-0 - Fax +43/2236/636 62
office@hesse-maschinen.com