HYDRAULIC CNC PRESS BRAKE HESSE CNC plus+

mod. CNC plus 30175

The CNC press brakes HESSE are available in up to eleven axes configurations.
The CNC plus+ is equipped with CNC Cybelec ModEva 10S, 2-axes back gauge, manual anti deflection system and standard Amada-Promecam tool system.

At all models the synchronisation of Y1 and Y2 is controlled by proportional valves.

Flexibility, quality, productivity and safety…united in the HESSE CNC press brakes.
Computer Numerical Control

Cybelec ModEva 10S		 Cybelec ModEva 10S

• 2D graphic
• 10” color display
• 256 MByte memory
• PC software for work station
• ergonomic design
• software key switch for operating level selection
• quick-cursor
• multi simulation (suggestion of various bending sequences
from system to choose from)
• CPU unit protected in electric carbinet – only user terminal
outside the machine
• direct bending angle input
• user-friendly programming in dialogue form
• graphic simulation of the bending process on screen
• automatic calculation of the blank sheet size
• programming of upper beam at an angle
• programmable tool dimensions for easy recall when
programming a product
• correction factor for spring-back and straight length
• bending angle correction
• programming of bending and retraction speed
• manual, semi automatic and full automatic working mode
• tonnage calculation/programming by CNC
• floppy disc drive
• current programs can be interrupted easily for single bendings
and can be subsequently continued and finished

Cybelec ModEva 12S (option) 		  Cybelec ModEva 12S (option)

like model ModEva 10S but additional:
3D graphic
12“ color display
20 GByte memory

Cybelec ModEva 15S (option) 		  Cybelec ModEva 15S (option)

like model ModEva 12S but additional:
15“ color display
touch screen (option)
back gauge

2-axes Hinteranschlag X/R
The finger block depth and height position are automatically calculated and positioned with the control on ball screws and linear guides.
If it is necessary for the work piece the back gauge retraction is also done automatically. The finger block distance is easy manual adjustable along the linear guide.
anti deflection

manual, central with hand wheel adjustable anti deflection system in table

motorized anti deflection system controlled by CNC (option)
To get a constant bending angle over the whole length also on longer work pieces a anti deflection system is used.
tools
Various standard AMADA-PROMECAM precision tools are available - sharp, straight, cranked, stamping tools etc.
Individual upper and lower tools are also fast available - please ask for our seperate tools catalogue.

Standard-Promecam-Amada system tools
safety
All HESSE CNC press brakes comply with the actual safety and CE-regulations and are equipped (among other things) with laser safety device on the machine front.
standard equipment
• CNC graphic control Cybelec ModEva 10S
Windows with PC-Software
• Y1, Y2, X, R (4 axes)
• manual, central with hand wheel adjustable
anti deflection system in table (except models
1240 and 1260)
• up to 500 mm/sec. back gauge speed
• up to 200 mm/sec. ram speed
• tool system Amada-Promecam
• upper tool 75°, light cranked, radius hardened,
ground and sectioned
• 4-V die 16/ 22/ 35/ 50 mm, hardened and ground
(up to 320 to)
• HESSE multi-V die block (starting from 400 to)
• motorized back gauge on linear guides and ball
screws
• sheet support arms with T-slots and tilt stops
• laser safety device
• in conformity with CE-regulations
optional equipment
• motorized anti deflection system controlled by CNC
• additional controlled axes of back gauge X1/X2, R1/R2, Z1/Z2
• heavy duty 6 axis back gauge (Z1, Z2, X1, X2, R1, R2)
• AP3-AP4 sheet follower with sliding guide
• parking area for support arms (1 meter)
• HESSE hydr. upper tool clamping for WILA tools (without tool)
• HESSE hydr. lower tool clamping for WILA tools (without tool) with motorized anti deflection system
controlled by CNC
• hyd. upper tool clamping WILA NSCL-II (without tool)
• hyd. lower tool clamping WILA NSCR-II (without tool) with motorized anti deflection system
controlled by CNC
• mech. upper tool clamping WILA NSCL Basic (without tool)
• mech. lower tool clamping WILA NSCR Basic (without tool) with motorized anti deflection system
controlled by CNC
• hydr. upper tool clamping system Amada-Promecam
• special throat depth
• other safety devices
• additional finger blocks
• additional support arms
• quick tool clamping
• sliding arms
• laser hardened HESSE tools
• CYBELEC ModEva 12S 3D (Windows)
• CYBELEC ModEva 15S 3D (Windows)
• laser based measuring device for bending angle
• air conditioned electrical box
• T-slots in table
• oil cooler
• tandem preperation
• central lubrication

laser measuring device for bending angle (option)

sheet follower with sliding guide (option)

attention: Acrobat Reader required

HESSE+CO Maschinenfabrik GmbH
 IZ NOE-Sued - Straße 4 Objekt 8 - Austria-2351 Wiener Neudorf
Tel. +43/2236/638 70-0 - Fax +43/2236/636 62
office@hesse-maschinen.com