HYDRAULIC CNC GUILLOTINE SHEARS HESSE VS

mod. VS 3010

machines back side

At the linear guided CNC guillotine shears HESSE VS the blade beam will not go downward by a pivot like on swing beam guillotines but with a linear movement on accordingly guides. Thus the adjustment of the cutting angle is possible to get material-related ideal cutting results e.g. decrease of twisting when cutting thin narrow metal strips. The cutting angle can be reduced to a minimum value of 0° 30'. The CNC control calculates dependent on material type, sheet metal thickness and cutting measures the necessary data and adjusts the parameters for cutting gap, cutting angle, cutting length and back gauge automatically.
Computer Numerical Control

CYBELEC DNC 60 		computer numerical control CYBELEC DNC 60

• Numerical display (no graphics)
• ergonomic design
• automatic control of back gauge, cutting angle,
cutting gap and cutting length
• automatic relieve of back gauge
• manual, semi-automatic and full-automatic
working modes
• integration of free axes possible (loader,
feeder, …)
back gauge
The standard back gauge with a range of 1,000 mm is installed on linear guidances free from play and is moved on ball screws with max. 200 mm/sec. The positioning accuracy is +/- 0.1 mm. A standard characteristic of the back gauge is the cutting gap compensation as well as the automatic relieve if narrow strips to be cut. The back gauge can be lifted up automatically at the rear position to cut sheet metal with unlimited length.

back gauge

folding up finger guard, downholder and balls in table

adjustable angle stop 0-180° (option)

pneumatic sheet support system (option)
works against the natural bend of thin sheet metals at bigger cutting depths
standard equipment
• CNC CYBELEC DNC 60 mounted on swivel arm
• controlled back gauge 1.000 mm range on ball screws
• controlled gap, cutting length and cutting angle adjustment
• folding up finger guard on 1.000 mm
• 2 - 8 sheet supporting arms 1.000 mm with T-slot
• 1 squaring arm 1.500 mm with T-slot, tilting stop and scale
• cutting line illumination
• balls in table
• independent hydr. down holders
• moveable foot switch with emergency stop button
• light barrier on machines back
• machine and equipment according to the CE regulations
optional equipment
• angle stop 0-180°
• pneumatic sheet support system
• sheet support arms 2.000 and 3.000 mm
• light barrier for finger guard
• front gauges
• oil cooler
• increased strokes per minute
• hydraulic folding up back gauge
• bigger throat depth

attention: Acrobat Reader required

HESSE+CO Maschinenfabrik GmbH
 IZ NOE-Sued - Straße 4 Objekt 8 - Austria-2351 Wiener Neudorf
Tel. +43/2236/638 70-0 - Fax +43/2236/636 62
office@hesse-maschinen.com